PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RW32S
RW32S ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-039-3545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RW32S
NSN: 3110-01-039-3545
FSC: 3110
CAGE: 96881 — THOMSON INDUSTRIES INC (USA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_between_flats0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN3110-01-039-3545
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RW32S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
F927Interchangeable
interchangeable cross-reference
interchangeable
8636362Interchangeable
interchangeable cross-reference
interchangeable
100-68Interchangeable
interchangeable cross-reference
interchangeable
271-7502PGInterchangeable
interchangeable cross-reference
interchangeable
858-00314-000Interchangeable
interchangeable cross-reference
interchangeable
200087-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RW32S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RW32S?
RW32S is a BEARING.
What parts can replace RW32S?
There are 9 known substitutes for RW32S: F927, 8636362, 100-68 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RW32S?
RW32S is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-039-3545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RW32S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026