PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RW1/820358 PIECE 23
RW1/820358 PIECE 23 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RW1/820358 PIECE 23 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-195-6626, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RW1/820358 PIECE 23
NSN: 3110-01-195-6626
FSC: 3110
CAGE: K0254 — OZALID ENGINEERING LTD (GBR)
SPECIFICATIONS
Part NumberRW1/820358 PIECE 23
NSN3110-01-195-6626
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RW1/820358 PIECE 23 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 2.0 MILLIMETERS MAXIMUM MM
•
OVERALL OUTSIDE DIAMETER: 52.0 MILLIMETERS MAXIMUM MM
•
BORE DIAMETER: 20.0 MILLIMETERS NOMINAL MM
•
STANDOUT WIDTH: 3.25 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 15.0 MILLIMETERS MAXIMUM MM
•
STANDARD TOLERANCE DESIGNATION: INTERNATIONAL STANDARDS ORGANIZATION STANDARD TOLERANCE
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS2.0 MILLIMETERS MAXIMUM MM
OVERALL OUTSIDE DIAMETER52.0 MILLIMETERS MAXIMUM MM
BORE DIAMETER20.0 MILLIMETERS NOMINAL MM
STANDOUT WIDTH3.25 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
CONE WIDTH15.0 MILLIMETERS MAXIMUM MM
STANDARD TOLERANCE DESIGNATIONINTERNATIONAL STANDARDS ORGANIZATION STANDARD TOLERANCE
OVERALL WIDTH16.25 MILLIMETERS NOMINAL MM
BACKFACE CORNER RADIUS2.0 MILLIMETERS MAXIMUM MM
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
30304Interchangeable
interchangeable cross-reference
interchangeable
100-2Interchangeable
interchangeable cross-reference
interchangeable
MD115VACSLInterchangeable
interchangeable cross-reference
interchangeable
202A03Interchangeable
interchangeable cross-reference
interchangeable
517Interchangeable
interchangeable cross-reference
interchangeable
118235Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RW1/820358 PIECE 23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RW1/820358 PIECE 23?
RW1/820358 PIECE 23 is a RW1/820358 PIECE 23.
What parts can replace RW1/820358 PIECE 23?
There are 13 known substitutes for RW1/820358 PIECE 23: 30304, 100-2, MD115VACSL and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RW1/820358 PIECE 23?
RW1/820358 PIECE 23 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-195-6626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RW1/820358 PIECE 23

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026