PartsTable
Technical Data Sheet

RW1/820358 — BEARING,ROLLER,SELF-ALIGNING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

RW1/820358: BEARING,ROLLER,SELF-ALIGNING.

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY SEPARATOR, bore_shape: STRAIGHT, bore_diameter: 25.0 MILLIMETERS NOMINAL MM, overall_width: 15.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: ONE DIRECTION. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-194-4560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RW1/820358
NSN: 3110-01-194-4560
NIINs: 011944560, 012016334, 012030159
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: K2182 — DAVID BROWN GEAR SYSTEMS LIMITED (GBR)
SPECIFICATIONS
materialCOPPER ALLOY SEPARATOR
bore_shapeSTRAIGHT
bore_diameter25.0 MILLIMETERS NOMINAL MM
overall_width15.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureONE DIRECTION
style_designatorSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
overall_outside_diameter52.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.1
NSN3110-01-194-4560
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RW1/820358 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOCATING FEATURE: ONE DIRECTION
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 52.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOCATING FEATUREONE DIRECTION
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER52.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER25.0 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 1
FF-B-185Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy RW1/820358?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RW1/820358?
RW1/820358 is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace RW1/820358?
There is 1 known substitute for RW1/820358: FF-B-185. Substitute compatibility should be verified for your specific system.
What is the NSN for RW1/820358?
RW1/820358 is cataloged in the U.S. Government catalog under NSN 3110-01-194-4560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RW1/820358