RV5928-4-5: RIVET,SOLID.
The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: STRAIGHT W/RADIUS CHAMFERED TIP, heat_treatment: ANNEALED OVERALL, shank_diameter: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, shear_strength: 49000 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-066-1965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | NICKEL ALLOY 400 OVERALL |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| shank_style | STRAIGHT W/RADIUS CHAMFERED TIP |
| heat_treatment | ANNEALED OVERALL |
| shank_diameter | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| shear_strength | 49000 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| countersink_angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| head_major_diameter | 0.1957 INCHES MAXIMUM IN |
| specification/standard_data | 80205-NAS1200 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| material_document_and_classification | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| NSN | 5320-01-066-1965 |
| SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| HEAT TREATMENT | ANNEALED OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SPECIFICATION/STANDARD DATA | 80205-NAS1200 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SHEAR STRENGTH | 49000 SINGLE POUNDS PER SQUARE INCH |
| MATERIAL | NICKEL ALLOY 400 OVERALL |
No substitute or cross-reference records for this part.