RV591-3-1 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

RV591-3-1: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.040 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, shank_style: PULL THROUGH HOLLOW SHANK, shank_diameter: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, shear_strength: 70 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-978-8075, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

RV591-3-1

NSN: 5320-00-978-8075
FSC: 5320 — Rivets
CAGE: 98996 — OLYMPIC FASTENING SYSTEMS INC (USA)

SPECIFICATIONS

material	NICKEL ALLOY 400 OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.040 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
shank_style	PULL THROUGH HOLLOW SHANK
shank_diameter	0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
shear_strength	70 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.140 INCHES MAXIMUM IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM
head_major_diameter	0.179 INCHES NOMINAL IN
material_document_and_classification	QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5320-00-978-8075

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.140 INCHES MAXIMUM IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.040 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN

•

SHANK STYLE: PULL THROUGH HOLLOW SHANK

•

COUNTERSINK ANGLE: 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
FASTENER LENGTH	0.140 INCHES MAXIMUM IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.040 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
SHANK STYLE	PULL THROUGH HOLLOW SHANK
COUNTERSINK ANGLE	98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM
SHEAR STRENGTH	70 SINGLE POUNDS PER SQUARE INCH
MATERIAL	NICKEL ALLOY 400 OVERALL

SUBSTITUTES & CROSS-REFERENCES 1

MS20605M3W1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RV591-3-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RV591-3-1?

RV591-3-1 is a RIVET,BLIND.

What parts can replace RV591-3-1?

There is 1 known substitute for RV591-3-1: MS20605M3W1. Substitute compatibility should be verified for your specific system.

What is the NSN for RV591-3-1?

RV591-3-1 is cataloged in the U.S. Government catalog under NSN 5320-00-978-8075. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RV591-3-1 — RIVET,BLIND

Request a Quote — RV591-3-1