RV4NAYSN254A — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.562 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 1.500 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 1.094 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5905-00-434-1863, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RV4NAYSN254A

NSN: 5905-00-434-1863
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.562 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	1.500 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	1.094 INCHES NOMINAL IN
overall_length	2.062 INCHES NOMINAL IN
shaft_diameter	0.250 INCHES NOMINAL IN
mounting_method	STANDARD BUSHING
overall_diameter	1.515 INCHES MAXIMUM IN
section_quantity	1
terminal_location	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NSN	5905-00-434-1863

COMPONENT DIAGRAM

KEY FEATURES

•

ACTUATOR TYPE: SINGLE SHAFT

•

OVERALL DIAMETER: 1.515 INCHES MAXIMUM IN

•

TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG

•

SPECIFICATION/STANDARD DATA: 81349-MIL-R-94/5 GOVERNMENT SPECIFICATION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER: 70.0 SINGLE SECTION

•

POWER DISSIPATION RATING PER SECTION IN WATTS: 2.0 FREE AIR SINGLE SECTION

•

TEST DATA DOCUMENT: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 SINGLE SECTION

TECHNICAL CHARACTERISTICS

ACTUATOR TYPE	SINGLE SHAFT
OVERALL DIAMETER	1.515 INCHES MAXIMUM IN
TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG
SPECIFICATION/STANDARD DATA	81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT	81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
ACTUATOR TRAVEL CONTROL FEATURE	STOPS

VERIFIED SUBSTITUTES & CROSS-REFERENCES 18

27379AInterchangeableGOVERNMENT REGISTRY