RV3AYSD105C — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5905-00-578-4807, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RV3AYSD105C

NSN: 5905-00-578-4807
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
overall_length	1.312 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
shaft_diameter	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
mounting_method	STANDARD BUSHING
overall_diameter	1.515 INCHES MAXIMUM IN
section_quantity	1
terminal_location	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NSN	5905-00-578-4807

COMPONENT DIAGRAM

KEY FEATURES

•

SECTION QUANTITY: 1

•

TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE

•

RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 SINGLE SECTION

•

MAXIMUM STOP TORQUE: 128.00 INCH-OUNCES IN

•

OVERALL DIAMETER: 1.515 INCHES MAXIMUM IN

•

SPECIFICATION/STANDARD DATA: 81349-MIL-R-94/5 GOVERNMENT SPECIFICATION

•

POWER DISSIPATION RATING PER SECTION IN WATTS: 1.0 FREE AIR SINGLE SECTION

•

TEST DATA DOCUMENT: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

TECHNICAL CHARACTERISTICS

SECTION QUANTITY	1
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
MAXIMUM STOP TORQUE	128.00 INCH-OUNCES IN
OVERALL DIAMETER	1.515 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA	81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT	81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG

VERIFIED SUBSTITUTES & CROSS-REFERENCES 27

3224-00InterchangeableGOVERNMENT REGISTRY