RV1101-5-4: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 STEM, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, heat_treatment: T-4 SOLUTION HEAT TREATED OVERALL, shank_diameter: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5320-00-006-0792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 7075 STEM |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| heat_treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| shank_diameter | 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN |
| shear_strength | 935 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.437 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| special_features | STEM DYED BLUE |
| countersink_angle | 100.0 DEGREES NOMINAL |
| surface_treatment | ANODIZE OR CHROMATE OVERALL |
| NSN | 5320-00-006-0792 |
| SHANK DIAMETER | 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.437 INCHES MAXIMUM IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541,CLASS 1A MIL SPEC 2ND TREATMENT RESPONSE OVERALL A |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SPECIFICATION/STANDARD DATA | 80205-NAS1769 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| GRIP LENGTH | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.