RV1/2-S102A — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RV1/2-S102A: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.000 INCHES NOMINAL IN, flat_height: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, shaft_style: ROUND, FLATTED, shaft_length: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-080-4479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RV1/2-S102A

NSN: 5905-01-080-4479
FSC: 5905 — Resistor
CAGE: 04454 — SENSOR SYSTEMS, L.L.C. DBA SENSOR SYSTEMS LLC (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	1.000 INCHES NOMINAL IN
flat_height	0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
shaft_style	ROUND, FLATTED
shaft_length	0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	0.625 INCHES NOMINAL IN
shaft_diameter	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
mounting_method	STANDARD BUSHING
section_quantity	2
special_features	MOUNTING METHOD: STANDARD BUSHING W/SHAFT SEAL
first_flat_length	0.250 INCHES NOMINAL IN
NSN	5905-01-080-4479

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 4.50 INCH-OUNCES IN

•

BODY DIAMETER: 0.625 INCHES NOMINAL IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 25.000 KILOHMS ALL SECTIONS

•

SECTION QUANTITY: 2

•

SHAFT DIAMETER: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

•

FIRST FLAT LENGTH: 0.250 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	4.50 INCH-OUNCES IN
BODY DIAMETER	0.625 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	25.000 KILOHMS ALL SECTIONS
SECTION QUANTITY	2
SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
FIRST FLAT LENGTH	0.250 INCHES NOMINAL IN
MOUNTING METHOD	STANDARD BUSHING
MAXIMUM STARTING TORQUE	4.50 INCH-OUNCES IN

SUBSTITUTES & CROSS-REFERENCES 4

83410 94988Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

RV1/2-S102Reference document

Same NSN cross-reference

Reference document — Secondary reference

83410Reference document

Same NSN cross-reference

Reference document — Secondary reference

10WB2-2885Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy RV1/2-S102A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RV1/2-S102A?

RV1/2-S102A is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace RV1/2-S102A?

There are 4 known substitutes for RV1/2-S102A: 83410 94988, RV1/2-S102, 83410 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RV1/2-S102A?

RV1/2-S102A is cataloged in the U.S. Government catalog under NSN 5905-01-080-4479. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RV1/2-S102A — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — RV1/2-S102A