PartsTable
Technical Data Sheet
Download PDF

RT7-8 265 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

RT7-8 265: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.500 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.880 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-726-7307, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RT7-8 265
NSN: 5905-00-726-7307
FSC: 5905 — Resistor
CAGE: 06880 — DATA INSTRUMENTS INC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.500 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.880 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.875 INCHES NOMINAL IN
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity4
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
nonturn_device_radius0.281 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
NSN5905-00-726-7307
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN RT7-8 265 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
NONTURN DEVICE LOCATION: AT 6 OCLOCK
•
BODY DIAMETER: 0.875 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 100.000 KILOHMS ALL SECTIONS
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 85.0 ALL SECTIONS
•
SECTION QUANTITY: 4
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL IN
•
NONTURN DEVICE RADIUS: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NONTURN DEVICE LOCATIONAT 6 OCLOCK
BODY DIAMETER0.875 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION100.000 KILOHMS ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 ALL SECTIONS
SECTION QUANTITY4
SHAFT DIAMETER0.125 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.281 INCHES NOMINAL IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
MOUNTING METHODSTANDARD BUSHING
OTHER ITEMS IN FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059
SUBSTITUTES & CROSS-REFERENCES 1
1048658-4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RT7-8 265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RT7-8 265?
RT7-8 265 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace RT7-8 265?
There is 1 known substitute for RT7-8 265: 1048658-4. Substitute compatibility should be verified for your specific system.
What is the NSN for RT7-8 265?
RT7-8 265 is cataloged in the U.S. Government catalog under NSN 5905-00-726-7307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RT7-8 265