PartsTable
Technical Data Sheet
RT15-TZ ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_length: 5.25 INCHES NOMINAL IN, surface_treatment: ZINC, part_name_assigned_by_controlling_agency: CONNECTOR, TRUSS TO WALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-672-5524, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RT15-TZ
NSN: 5340-01-672-5524
FSC: 5340
CAGE: 645U3 — MITEK USA, INC. (USA)
SPECIFICATIONS
materialSTEEL
overall_length5.25 INCHES NOMINAL IN
special_features18 STEEL GUAGE; NAIL SIZE : 8D X 1.50"; FINISH IS TRIPLE ZINC; ALLOWABLE LOADS HAVE BEEN INCREASED BY 60% FOR WIND AND SEISMIC LOADS
surface_treatmentZINC
part_name_assigned_by_controlling_agencyCONNECTOR, TRUSS TO WALL
NSN5340-01-672-5524
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RT15-TZ MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: ZINC
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH5.25 INCHES NOMINAL IN
SPECIAL FEATURES18 STEEL GUAGE; NAIL SIZE : 8D X 1.50"; FINISH IS TRIPLE ZINC; ALLOWABLE LOADS HAVE BEEN INCREASED BY 60% FOR WIND AND SEISMIC LOADS
PART NAME ASSIGNED BY CONTROLLING AGENCYCONNECTOR, TRUSS TO WALL
SURFACE TREATMENTZINC
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
A-A-50552Interchangeable
interchangeable cross-reference
interchangeable
27-41Interchangeable
interchangeable cross-reference
interchangeable
301Interchangeable
interchangeable cross-reference
interchangeable
AS0274-1Interchangeable
interchangeable cross-reference
interchangeable
4-1149-1DInterchangeable
interchangeable cross-reference
interchangeable
05-5446Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RT15-TZ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RT15-TZ?
RT15-TZ is a BRACKET,MOUNTING.
What parts can replace RT15-TZ?
There are 19 known substitutes for RT15-TZ: A-A-50552, 27-41, 301 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RT15-TZ?
RT15-TZ is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-672-5524. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RT15-TZ