RT12C2P102 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RT12C2P102: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, body_height: 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN, body_length: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-717-5884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RT12C2P102

NSN: 5905-00-717-5884
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES/SLOTS
body_width	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_height	0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
body_length	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
overall_width	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
overall_height	0.769 INCHES MINIMUM AND 0.861 INCHES MAXIMUM IN
overall_length	1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM IN
shaft_diameter	0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
mounting_method	UNTHREADED HOLE(S)
NSN	5905-00-717-5884

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 1.000 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS

•

TERMINAL LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.769 INCHES MINIMUM AND 0.861 INCHES MAXIMUM IN
ELECTRICAL RESISTANCE PER SECTION	1.000 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
TERMINAL LENGTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MOUNTING METHOD	UNTHREADED HOLE(S)
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 9

M39015/1-004PSReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

4171784-026Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

M39015-1-004PPReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

808180Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

339088-018Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-R-39015/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RT12C2P102?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RT12C2P102?

RT12C2P102 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace RT12C2P102?

There are 9 known substitutes for RT12C2P102: M39015/1-004PS, 4171784-026, M39015-1-004PP and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RT12C2P102?

RT12C2P102 is cataloged in the U.S. Government catalog under NSN 5905-00-717-5884. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RT12C2P102 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — RT12C2P102