PartsTable
Technical Data Sheet
Download PDF

RT-270-97DSS — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

RT-270-97DSS: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 INNER RACE, bore_shape: STRAIGHT, overall_width: 0.2500 INCHES NOMINAL IN, alignment_type: RIGID, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-092-8953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RT-270-97DSS
NSN: 3110-01-092-8953
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 75277 — KILIAN MANUFACTURING CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 INNER RACE
bore_shapeSTRAIGHT
overall_width0.2500 INCHES NOMINAL IN
alignment_typeRIGID
load_directionANGULAR
surface_finishGROUND
special_featuresLUBRICATED WITH BAUMS CASTORINE; STUD MADE OF TYPE 303 STAINLESS STEEL WITH WASHER; THE THREADED LENGTH IS 0.2500 INCH WITH 20 THREAD PER INCH; STUD IS 0.6250 INCHES LONG IN
overall_outside_diameter0.9062 INCHES NOMINAL IN
NSN3110-01-092-8953
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RT-270-97DSS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.9062 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL COMP 440A BALL A
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
OVERALL WIDTH0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.9062 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
ALIGNMENT TYPERIGID
SPECIAL FEATURESLUBRICATED WITH BAUMS CASTORINE; STUD MADE OF TYPE 303 STAINLESS STEEL WITH WASHER; THE THREADED LENGTH IS 0.2500 INCH WITH 20 THREAD PER INCH; STUD IS 0.6250 INCHES LONG IN
MATERIALSTEEL COMP 440A BALL A
MATERIALSTEEL COMP 303 INNER RACE
MATERIALSTEEL COMP 303 OUTER RACE
SUBSTITUTES & CROSS-REFERENCES 2
ST15-245DSSReference document
Same NSN cross-reference
Reference document — Secondary reference
50483Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RT-270-97DSS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RT-270-97DSS?
RT-270-97DSS is a BEARING,BALL,ANNULAR.
What parts can replace RT-270-97DSS?
There are 2 known substitutes for RT-270-97DSS: ST15-245DSS, 50483. Substitute compatibility should be verified for your specific system.
What is the NSN for RT-270-97DSS?
RT-270-97DSS is cataloged in the U.S. Government catalog under NSN 3110-01-092-8953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RT-270-97DSS