PartsTable
Technical Data Sheet
Download PDF

RS62200MSC — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

RS62200MSC: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: DISHED, seal_width: 0.095 INCHES NOMINAL IN, surface_treatment: CADMIUM CASE, housing_bore_diameter: 0.621 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-824-4547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RS62200MSC
NSN: 5330-00-824-4547
FSC: 5330 — Packing and Gasket Materials
CAGE: 0EPS4 — GAYNOR INDUSTRIES INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleDISHED
seal_width0.095 INCHES NOMINAL IN
surface_treatmentCADMIUM CASE
housing_bore_diameter0.621 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter0.250 INCHES NOMINAL IN
NSN5330-00-824-4547
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RS62200MSC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.095 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 0.621 INCHES NOMINAL IN
•
CASE STYLE: DISHED
•
ACCOMMODATED SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.095 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER0.621 INCHES NOMINAL IN
CASE STYLEDISHED
ACCOMMODATED SHAFT DIAMETER0.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
900-6091Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RS62200MSC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RS62200MSC?
RS62200MSC is a SEAL,PLAIN ENCASED.
What parts can replace RS62200MSC?
There is 1 known substitute for RS62200MSC: 900-6091. Substitute compatibility should be verified for your specific system.
What is the NSN for RS62200MSC?
RS62200MSC is cataloged in the U.S. Government catalog under NSN 5330-00-824-4547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RS62200MSC

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.