PartsTable
Technical Data Sheet
Download PDF

RS311 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

RS311: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 55.0 MILLIMETERS NOMINAL MM, overall_width: 29.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: NONLOCATING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-155-7357, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RS311
NSN: 3110-00-155-7357
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 05527 — GWILLIAM COMPANY, INC. DIV BALL & ROLLER BEARING DIVISION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter55.0 MILLIMETERS NOMINAL MM
overall_width29.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
overall_outside_diameter120.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
NSN3110-00-155-7357
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RS311 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 120.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
OVERALL WIDTH29.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER120.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER55.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 4
R355Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-55602-16JC0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MU1311CLReference document
Same NSN cross-reference
Reference document — Secondary reference
N311Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RS311?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RS311?
RS311 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace RS311?
There are 4 known substitutes for RS311: R355, A-A-55602-16JC0, MU1311CL and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RS311?
RS311 is cataloged in the U.S. Government catalog under NSN 3110-00-155-7357. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RS311