PartsTable
Technical Data Sheet
Download PDF

RRS12R5 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

RRS12R5: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 2.250 INCHES MAXIMUM IN, flat_height: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN, shaft_style: ROUND, FLATTED, shaft_length: 1.953 INCHES MINIMUM AND 2.047 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-280-0801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RRS12R5
NSN: 5905-00-280-0801
FSC: 5905 — Resistor
CAGE: 44655 — OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length2.250 INCHES MAXIMUM IN
flat_height0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
shaft_styleROUND, FLATTED
shaft_length1.953 INCHES MINIMUM AND 2.047 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter8.090 INCHES MAXIMUM IN
overall_length4.297 INCHES MAXIMUM IN
shaft_diameter0.373 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
mounting_methodTHREADED HOLE(S)
overall_diameter8.645 INCHES MAXIMUM IN
section_quantity1
NSN5905-00-280-0801
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN RRS12R5 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
BODY DIAMETER: 8.090 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 20.0
•
ELECTRICAL RESISTANCE PER SECTION: 15.0 OHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 390.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
MOUNTING FACILITY QUANTITY: 2
•
SHAFT DIAMETER: 0.373 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
BODY STYLE: CYLINDRICAL BUSHING MOUNTED
TECHNICAL CHARACTERISTICS
BODY DIAMETER8.090 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH20.0
ELECTRICAL RESISTANCE PER SECTION15.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER390.0 SINGLE SECTION
SECTION QUANTITY1
MOUNTING FACILITY QUANTITY2
SHAFT DIAMETER0.373 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER8.645 INCHES MAXIMUM IN
FIRST FLAT LENGTH1.844 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
0857Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-PRF-22/12Reference document
Same NSN cross-reference
Reference document — Identification reference
M22/12-00091FJSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
RP451FJ150KKReference document
Same NSN cross-reference
Reference document — Secondary reference
MILR22-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RRS12R5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RRS12R5?
RRS12R5 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace RRS12R5?
There are 5 known substitutes for RRS12R5: 0857, MIL-PRF-22/12, M22/12-00091FJ and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RRS12R5?
RRS12R5 is cataloged in the U.S. Government catalog under NSN 5905-00-280-0801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RRS12R5