PartsTable
Technical Data Sheet
PartsTable / MRO / RR2000D3C9I502
RR2000D3C9I502 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.312 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: SLEEVE SHAFT, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN, shaft_length: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-01-293-2392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RR2000D3C9I502
NSN: 5905-01-293-2392
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.312 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeSLEEVE SHAFT
pilot_length0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
shaft_runout0.002 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter2.031 INCHES MAXIMUM IN
cubic_measure4.122 CUBIC INCHES
lateral_runout0.002 INCHES IN
pilot_diameter1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
NSN5905-01-293-2392
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN RR2000D3C9I502 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
BODY STYLE: CYLINDRICAL SERVO MOUNTED
•
BEARING TYPE: SLEEVE SHAFT
•
MOUNTING LIP DIAMETER: 1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM IN
•
MOUNTING LIP DEPTH: 0.0870 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 5.0 KILOHMS SINGLE SECTION
•
PILOT DIAMETER RUNOUT: 0.001 INCHES IN
•
SHAFT END PLAY: 0.005 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY STYLECYLINDRICAL SERVO MOUNTED
BEARING TYPESLEEVE SHAFT
MOUNTING LIP DIAMETER1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM IN
MOUNTING LIP DEPTH0.0870 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
PILOT DIAMETER RUNOUT0.001 INCHES IN
SHAFT END PLAY0.005 INCHES IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
RR2000C5A9T103Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-12934/4Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-12934/4Interchangeable
interchangeable cross-reference
interchangeable
RR2000F3A7V502Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-12934/6Interchangeable
interchangeable cross-reference
interchangeable
RR2000D3C9G203Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RR2000D3C9I502?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RR2000D3C9I502?
RR2000D3C9I502 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace RR2000D3C9I502?
There are 9 known substitutes for RR2000D3C9I502: RR2000C5A9T103, MIL-PRF-12934/4, MIL-R-12934/4 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RR2000D3C9I502?
RR2000D3C9I502 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-01-293-2392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RR2000D3C9I502

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026