RR1100A2B8I202 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RR1100A2B8I202: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.812 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BEARING SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-152-2572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RR1100A2B8I202

NSN: 5905-01-152-2572
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	CYLINDRICAL SERVO MOUNTED
body_length	0.812 INCHES MAXIMUM IN
shaft_style	ROUND
bearing_type	BEARING SHAFT
pilot_length	0.0620 INCHES NOMINAL IN
shaft_length	0.375 INCHES NOMINAL IN
shaft_runout	0.001 INCHES IN
actuator_type	SINGLE SHAFT
body_diameter	1.125 INCHES MAXIMUM IN
lateral_runout	0.001 INCHES IN
pilot_diameter	0.9688 INCHES NOMINAL IN
shaft_diameter	0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
NSN	5905-01-152-2572

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 0.30 INCH-OUNCES IN

•

BODY DIAMETER: 1.125 INCHES MAXIMUM IN

•

LATERAL RUNOUT: 0.001 INCHES IN

•

ELECTRICAL RESISTANCE PER SECTION: 2.0 KILOHMS SINGLE SECTION

•

MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION

•

UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN

•

SECTION QUANTITY: 1

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	0.30 INCH-OUNCES IN
BODY DIAMETER	1.125 INCHES MAXIMUM IN
LATERAL RUNOUT	0.001 INCHES IN
ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH	0.0620 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
UNDERCUT WIDTH	0.0570 INCHES MINIMUM IN
SECTION QUANTITY	1
SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
UNDERCUT DIAMETER	0.975 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

MIL-PRF-12934/2Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-R-12934/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RR1100A2B8I202?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RR1100A2B8I202?

RR1100A2B8I202 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).

What parts can replace RR1100A2B8I202?

There are 2 known substitutes for RR1100A2B8I202: MIL-PRF-12934/2, MIL-R-12934/2. Substitute compatibility should be verified for your specific system.

What is the NSN for RR1100A2B8I202?

RR1100A2B8I202 is cataloged in the U.S. Government catalog under NSN 5905-01-152-2572. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RR1100A2B8I202 — RESISTOR,VARIABLE,WIRE WOUND,PRE

Request a Quote — RR1100A2B8I202