PartsTable
Technical Data Sheet
Download PDF

RNC64HE050-4 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

RNC64HE050-4: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN, pilot_length: 0.029 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-035-3147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RNC64HE050-4
NSN: 5310-01-035-3147
FSC: 5310 — Nuts and Washers
CAGE: 30343 — RADIO COMPONENT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
pilot_length0.029 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
nominal_thread_size0.138 INCHES IN
thread_quantity_per_inch32
NSN5310-01-035-3147
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: RNC64HE050-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
PILOT DIAMETER: 0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.029 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
PILOT DIAMETER0.197 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
PILOT LENGTH0.029 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
NUT HEIGHT0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
ST21900028-104Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
RCN64HE050-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
NCN6-2-050-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RNC64HE050-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RNC64HE050-4?
RNC64HE050-4 is a NUT,PLAIN,CLINCH.
What parts can replace RNC64HE050-4?
There are 3 known substitutes for RNC64HE050-4: ST21900028-104, RCN64HE050-4, NCN6-2-050-4. Substitute compatibility should be verified for your specific system.
What is the NSN for RNC64HE050-4?
RNC64HE050-4 is cataloged in the U.S. Government catalog under NSN 5310-01-035-3147. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RNC64HE050-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.