PartsTable
Technical Data Sheet
Download PDF

RMLH1801-070U — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

RMLH1801-070U: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.435 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-857-5976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RMLH1801-070U
NSN: 5310-00-857-5976
FSC: 5310 — Nuts and Washers
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.435 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
countersink_angle88.0 DEGREES NOMINAL NUT
surface_treatmentCADMIUM OVERALL
width_across_flats0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
NSN5310-00-857-5976
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: RMLH1801-070U · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.435 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
5310PL1553495Reference document
Same NSN cross-reference
Reference document — Informative reference only
H55-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS1022AM7Reference document
Same NSN cross-reference
Reference document — Secondary reference
28FH-720UNSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
RM1801-070USame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS21045L7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy RMLH1801-070U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RMLH1801-070U?
RMLH1801-070U is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace RMLH1801-070U?
There are 7 known substitutes for RMLH1801-070U: 5310PL1553495, H55-7, NAS1022AM7 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RMLH1801-070U?
RMLH1801-070U is cataloged in the U.S. Government catalog under NSN 5310-00-857-5976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RMLH1801-070U