PartsTable
Technical Data Sheet
Download PDF

RM4-5A — BEARING,ROLLER,ROD END

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

RM4-5A: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include phase: SINGLE, material: STEEL INNER RING, screen_size: 5.000 IN. IN, shank_style: EXTERNALLY THREADED, current_type: AC, thread_class: 3A A.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-180-7622, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RM4-5A
NSN: 3110-00-180-7622
NIINs: 001807622, 008952711
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
phaseSINGLE
materialSTEEL INNER RING
screen_size5.000 IN. IN
shank_styleEXTERNALLY THREADED
current_typeAC
thread_class3A A
beam_quantity1
bore_diameter0.2500 INCHES NOMINAL IN
overall_width19.000 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_height14.000 INCHES NOMINAL IN
NSN3110-00-180-7622
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RM4-5A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.3125 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.0000 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE ROW, CONCAVE ROLLERS
•
OVERALL OUTSIDE DIAMETER: 0.8000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.3125 INCHES NOMINAL IN
SHANK THREAD LENGTH1.0000 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3500 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW, CONCAVE ROLLERS
OVERALL LENGTH5.4400 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.8000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.3125 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
216-28484-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RM4-5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RM4-5A?
RM4-5A is a BEARING,ROLLER,ROD END. It is classified as a MRO (MRO_GENERAL).
What parts can replace RM4-5A?
There is 1 known substitute for RM4-5A: 216-28484-1. Substitute compatibility should be verified for your specific system.
What is the NSN for RM4-5A?
RM4-5A is cataloged in the U.S. Government catalog under NSN 3110-00-180-7622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RM4-5A