RM-76-88D/76-187D — MOWER,LAWN,TRACTOR PROPELLED

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

RM-76-88D/76-187D: MOWER,LAWN,TRACTOR PROPELLED.

The MOWER,LAWN,TRACTOR PROPELLED is a the manufacturer industrial component. Key specifications include moving_method: PUSHED OR TOWED, cutting_unit_type: ROTARY FLAT KNIFE, cutting_unit_width: 88.000 INCHES MINIMUM AND 187.000 INCHES MAXIMUM IN, cutting_height_range: +2.000 TO 8.000 INCHES IN, overall_cutting_width: 7.334 FEET MINIMUM AND 15.650 FEET MAXIMUM FT. This part is cataloged in the U.S.

Government catalog under NSN 3750-01-378-8525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

RM-76-88D/76-187D

NSN: 3750-01-378-8525
FSC: 3750 — Gardening Implements and Tools
CAGE: 96289 — KUT KWICK CORP (USA)

SPECIFICATIONS

moving_method	PUSHED OR TOWED
cutting_unit_type	ROTARY FLAT KNIFE
cutting_unit_width	88.000 INCHES MINIMUM AND 187.000 INCHES MAXIMUM IN
cutting_height_range	+2.000 TO 8.000 INCHES IN
cutting_unit_quantity	2
overall_cutting_width	7.334 FEET MINIMUM AND 15.650 FEET MAXIMUM FT
NSN	3750-01-378-8525

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING HEIGHT RANGE: +2.000 TO 8.000 INCHES IN

•

CUTTING UNIT TYPE: ROTARY FLAT KNIFE

•

MOVING METHOD: PUSHED OR TOWED

•

OVERALL CUTTING WIDTH: 7.334 FEET MINIMUM AND 15.650 FEET MAXIMUM FT

•

CUTTING UNIT WIDTH: 88.000 INCHES MINIMUM AND 187.000 INCHES MAXIMUM IN

•

CUTTING UNIT QUANTITY: 2

TECHNICAL CHARACTERISTICS

CUTTING HEIGHT RANGE	+2.000 TO 8.000 INCHES IN
CUTTING UNIT TYPE	ROTARY FLAT KNIFE
MOVING METHOD	PUSHED OR TOWED
OVERALL CUTTING WIDTH	7.334 FEET MINIMUM AND 15.650 FEET MAXIMUM FT
SPECIAL FEATURES	ENGINE TYPE,CUMMINS INDUSTRIAL DIESEL; CYLINDERS, 4; HORSEPOWER/RPM, 76BHP/2500 RPM; BATTERY, 12 VOLT; FUEL CAPACITY 28 GALLONS; TIRES 6.00 X 16 6PR FRONT; REAR DRIVE, 38 X 18.00 X 20 8 PR; STEERING TYPE, HYDROSTATIC POWER STEERING RPM
CUTTING UNIT WIDTH	88.000 INCHES MINIMUM AND 187.000 INCHES MAXIMUM IN
CUTTING UNIT QUANTITY	2

SUBSTITUTES & CROSS-REFERENCES 2

GM5900Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HR-9016Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy RM-76-88D/76-187D?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RM-76-88D/76-187D?

RM-76-88D/76-187D is a MOWER,LAWN,TRACTOR PROPELLED.

What parts can replace RM-76-88D/76-187D?

There are 2 known substitutes for RM-76-88D/76-187D: GM5900, HR-9016. Substitute compatibility should be verified for your specific system.

What is the NSN for RM-76-88D/76-187D?

RM-76-88D/76-187D is cataloged in the U.S. Government catalog under NSN 3750-01-378-8525. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RM-76-88D/76-187D — MOWER,LAWN,TRACTOR PROPELLED

Request a Quote — RM-76-88D/76-187D