RJR24CL103R — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RJR24CL103R: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.150 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.375 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.080 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-037-0745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RJR24CL103R

NSN: 5905-01-037-0745
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES
body_width	0.150 INCHES NOMINAL IN
body_height	0.375 INCHES NOMINAL IN
body_length	0.375 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.080 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
shaft_diameter	0.060 INCHES NOMINAL IN
mounting_method	UNTHREADED HOLE(S)
section_quantity	1
terminal_location	REAR END
reliability_indicator	NOT ESTABLISHED
NSN	5905-01-037-0745

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.060 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES

•

MOUNTING METHOD: UNTHREADED HOLE(S)

•

BODY WIDTH: 0.150 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.060 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
MOUNTING METHOD	UNTHREADED HOLE(S)
BODY WIDTH	0.150 INCHES NOMINAL IN
BODY HEIGHT	0.375 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER	0.072 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

MIL-PRF-22097/4Reference document

Same NSN cross-reference

Reference document — Identification reference

RJ24FL103Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-R-22097/4Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-R-39035/2Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

3292L1-103Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RJR24CL103R?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RJR24CL103R?

RJR24CL103R is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace RJR24CL103R?

There are 5 known substitutes for RJR24CL103R: MIL-PRF-22097/4, RJ24FL103, MIL-R-22097/4 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RJR24CL103R?

RJR24CL103R is cataloged in the U.S. Government catalog under NSN 5905-01-037-0745. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RJR24CL103R — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — RJR24CL103R