PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RICKKU-4-RT
RICKKU-4-RT ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 0.750 INCHES NOMINAL IN, material: PLASTIC OVERALL, mounting_method: ADHESIVE, loop/holding_dimension: 0.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-045-2669, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RICKKU-4-RT
NSN: 5340-01-045-2669
FSC: 5340
CAGE: 06915 — RICHCO INC (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length0.750 INCHES NOMINAL IN
materialPLASTIC OVERALL
mounting_methodADHESIVE
loop/holding_dimension0.250 INCHES NOMINAL IN
NSN5340-01-045-2669
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RICKKU-4-RT MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: ADHESIVE
•
LOOP/HOLDING DIMENSION: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODADHESIVE
LOOP/HOLDING DIMENSION0.250 INCHES NOMINAL IN
LENGTH0.750 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
75072Interchangeable
interchangeable cross-reference
interchangeable
935402Interchangeable
interchangeable cross-reference
interchangeable
HHB4628P2Interchangeable
interchangeable cross-reference
interchangeable
2159652Interchangeable
interchangeable cross-reference
interchangeable
BB38474Interchangeable
interchangeable cross-reference
interchangeable
3661579Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy RICKKU-4-RT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RICKKU-4-RT?
RICKKU-4-RT is a CLIP,SPRING TENSION.
What parts can replace RICKKU-4-RT?
There are 12 known substitutes for RICKKU-4-RT: 75072, 935402, HHB4628P2 and 9 more. Substitute compatibility should be verified for your specific system.
Is RICKKU-4-RT still available?
RICKKU-4-RT is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RICKKU-4-RT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026