PartsTable
Technical Data Sheet
Download PDF

RH-0026-4350-JEHT — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

RH-0026-4350-JEHT: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.410 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.750 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 1.680 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-122-7319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RH-0026-4350-JEHT
NSN: 5905-01-122-7319
FSC: 5905 — Resistor
CAGE: 24681 — MEMCOR INC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.410 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.680 INCHES MAXIMUM IN
cubic_measure3.126 CUBIC INCHES
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodLOCKING BUSHING
fragility_factorMODERATELY RUGGED
section_quantity1
special_featuresSHAFT,BUSHING,NONTURN DEVICE,AND LOCKING HARDWARE NON MAGNETIC
NSN5905-01-122-7319
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN RH-0026-4350-JEHT MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 40.00 INCH-OUNCES IN
•
NONTURN DEVICE LOCATION: AT 12 OCLOCK
•
BODY DIAMETER: 1.680 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 3.5 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 340.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE40.00 INCH-OUNCES IN
NONTURN DEVICE LOCATIONAT 12 OCLOCK
BODY DIAMETER1.680 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION3.5 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER340.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.500 INCHES NOMINAL IN
FRAGILITY FACTORMODERATELY RUGGED
SUBSTITUTES & CROSS-REFERENCES 3
41900028Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
41900028-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
62649Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RH-0026-4350-JEHT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RH-0026-4350-JEHT?
RH-0026-4350-JEHT is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace RH-0026-4350-JEHT?
There are 3 known substitutes for RH-0026-4350-JEHT: 41900028, 41900028-000, 62649. Substitute compatibility should be verified for your specific system.
What is the NSN for RH-0026-4350-JEHT?
RH-0026-4350-JEHT is cataloged in the U.S. Government catalog under NSN 5905-01-122-7319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RH-0026-4350-JEHT