PartsTable
Technical Data Sheet
PartsTable / O-RING / RG24
RG24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

INSTALLATION TOOL,FASTENER,PNEUM. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, functional_description: USED TO INSTALL HI-SHEAR HI-LITE, HI-LOK AND HI-TIGUE FASTENERS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-580-5053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RG24
NSN: 5331-00-580-5053
FSC: 5331 — O-RING
CAGE: 79934 — THE TIRE & RIM ASSOCIATION INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
functional_descriptionUSED TO INSTALL HI-SHEAR HI-LITE, HI-LOK AND HI-TIGUE FASTENERS
general_characteristics_item_descriptionPISTOL GRIP; 2 IN. EXTENDED SOCKET LG; 5/16 IN. HEX SOCKET; 1/16 IN. HEX WRENCH; 270 IN-LB MAX TORQUE; 600 RPM; 0.75 HP; 1/4 IN. NPT AIR INLET; 9-11/16 IN. O/A LG IN
NSN5331-00-580-5053
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RG24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
4844Interchangeable
interchangeable cross-reference
interchangeable
80-4-5Interchangeable
interchangeable cross-reference
interchangeable
40-4-5Interchangeable
interchangeable cross-reference
interchangeable
9140-0029Interchangeable
interchangeable cross-reference
interchangeable
3100-15-101Interchangeable
interchangeable cross-reference
interchangeable
8A8594Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RG24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RG24?
RG24 is a INSTALLATION TOOL,FASTENER,PNEUM.
What parts can replace RG24?
There are 12 known substitutes for RG24: 4844, 80-4-5, 40-4-5 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RG24?
RG24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-580-5053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RG24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026