PartsTable
Technical Data Sheet
PartsTable / MRO / RG10AU
RG10AU ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

The RG10AU is a the manufacturer industrial component. Key specifications include material: COPPER CORE CONDUCTOR SINGLE CONDUCTOR, conductor_form: STRANDED SINGLE CONDUCTOR, voltage_rating: 4000.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR, round_conductor_size: 13 AWG SINGLE CONDUCTOR, electrical_resistance: 52.0 OHMS IMPEDANCE, cross-sectional_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-00-161-0884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RG10AU
NSN: 6145-00-161-0884
FSC: 6145
CAGE: 80058 — JOINT ELECTRONICS TYPE DESIGNATION SYSTEM (USA)
SPECIFICATIONS
materialCOPPER CORE CONDUCTOR SINGLE CONDUCTOR
conductor_formSTRANDED SINGLE CONDUCTOR
voltage_rating4000.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
conductor_quantity1
round_conductor_size13 AWG SINGLE CONDUCTOR
electrical_resistance52.0 OHMS IMPEDANCE
cross-sectional_shape_styleROUND
strand_awg_size_per_conductor21 SINGLE CONDUCTOR
strand_quantity_per_conductor7 SINGLE CONDUCTOR
cross_section_outside_diameter0.475 INCHES NOMINAL IN
nominal_capacitance_in_picofarads29.5 PER FOOT
conductor_arrangement_and_quantity1 COAXIAL
NSN6145-00-161-0884
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: RG10AU · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS SECTION OUTSIDE DIAMETER: 0.475 INCHES NOMINAL IN
•
STRAND QUANTITY PER CONDUCTOR: 7 SINGLE CONDUCTOR
•
ROUND CONDUCTOR SIZE: 13 AWG SINGLE CONDUCTOR
•
CONDUCTOR FORM: STRANDED SINGLE CONDUCTOR
•
CONDUCTOR ARRANGEMENT AND QUANTITY: 1 COAXIAL
•
MATERIAL: COPPER CORE CONDUCTOR SINGLE CONDUCTOR
•
VOLTAGE RATING: 4000.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
•
STRAND AWG SIZE PER CONDUCTOR: 21 SINGLE CONDUCTOR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS SECTION OUTSIDE DIAMETER0.475 INCHES NOMINAL IN
STRAND QUANTITY PER CONDUCTOR7 SINGLE CONDUCTOR
ROUND CONDUCTOR SIZE13 AWG SINGLE CONDUCTOR
CONDUCTOR FORMSTRANDED SINGLE CONDUCTOR
CONDUCTOR ARRANGEMENT AND QUANTITY1 COAXIAL
MATERIALCOPPER CORE CONDUCTOR SINGLE CONDUCTOR
VOLTAGE RATING4000.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE SINGLE CONDUCTOR
STRAND AWG SIZE PER CONDUCTOR21 SINGLE CONDUCTOR
ELECTRICAL RESISTANCE52.0 OHMS IMPEDANCE
NOMINAL CAPACITANCE IN PICOFARADS29.5 PER FOOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
MIL-DTL-17/75Upgraded Successor
successor cross-reference
successor
M17/164-00002Upgraded Successor
successor cross-reference
successor
M17/75-RG365Upgraded Successor
successor cross-reference
successor
PP15133-8Upgraded Successor
successor cross-reference
successor
425-1544-00Upgraded Successor
successor cross-reference
successor
MIL-DTL-17/93Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RG10AU?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RG10AU?
RG10AU is a RG10AU. It is classified as a MRO (MRO_GENERAL).
What parts can replace RG10AU?
There are 29 known substitutes for RG10AU: MIL-DTL-17/75, M17/164-00002, M17/75-RG365 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RG10AU?
RG10AU is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-00-161-0884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RG10AU

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026