PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RFI95-1
RFI95-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include overall_diameter: 0.827 INCHES NOMINAL IN, special_features: MINIMUM LENGTH:0.662 NCHES,MAXIMUM LENGTH:0.722 INCHES,MED DIAMOND KNURL.FINISH:TFS-1A (NICKEL) A, surface_treatment: NICKEL, part_name_assigned_by_controlling_agency: CAP,PROTECTIVE,DUST.NO CHAIN/ROPE OR MOUNTING LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-592-2309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RFI95-1
NSN: 5340-01-592-2309
FSC: 5340
CAGE: 14949 — TROMPETER ELECTRONICS, INC. (USA)
SPECIFICATIONS
overall_diameter0.827 INCHES NOMINAL IN
special_featuresMINIMUM LENGTH:0.662 NCHES,MAXIMUM LENGTH:0.722 INCHES,MED DIAMOND KNURL.FINISH:TFS-1A (NICKEL) A
surface_treatmentNICKEL
part_name_assigned_by_controlling_agencyCAP,PROTECTIVE,DUST.NO CHAIN/ROPE OR MOUNTING LUG
NSN5340-01-592-2309
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RFI95-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.827 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMINIMUM LENGTH:0.662 NCHES,MAXIMUM LENGTH:0.722 INCHES,MED DIAMOND KNURL.FINISH:TFS-1A (NICKEL) A
PART NAME ASSIGNED BY CONTROLLING AGENCYCAP,PROTECTIVE,DUST.NO CHAIN/ROPE OR MOUNTING LUG
OVERALL DIAMETER0.827 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
10456Interchangeable
interchangeable cross-reference
interchangeable
682C834P1Interchangeable
interchangeable cross-reference
interchangeable
RFI95-13Interchangeable
interchangeable cross-reference
interchangeable
583-5707216Interchangeable
interchangeable cross-reference
interchangeable
583-5707216 ITEM 102Interchangeable
interchangeable cross-reference
interchangeable
RFI95-13-D10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RFI95-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RFI95-1?
RFI95-1 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace RFI95-1?
There are 7 known substitutes for RFI95-1: 10456, 682C834P1, RFI95-13 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RFI95-1?
RFI95-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-592-2309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RFI95-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026