PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RF341000X
RF341000X ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,STAMPED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: STAMPED, nut_height: 0.231 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN, surface_treatment: CHROMATE OVERALL, width_across_flats: 1.292 INCHES MINIMUM AND 1.299 INCHES MAXIMUM IN, mating_member_diameter_accommodated: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-077-1930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RF341000X
NSN: 5310-01-077-1930
FSC: 5310
CAGE: 77122 — TRW ASSEMBLIES AND FASTENERS GROUP FASTENERS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSTAMPED
nut_height0.231 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
surface_treatmentCHROMATE OVERALL
width_across_flats1.292 INCHES MINIMUM AND 1.299 INCHES MAXIMUM IN
gripping_notch_quantity6
mating_member_diameter_accommodated0.750 INCHES NOMINAL IN
NSN5310-01-077-1930
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: RF341000X · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.292 INCHES MINIMUM AND 1.299 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
NUT HEIGHT: 0.231 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
•
GRIPPING NOTCH QUANTITY: 6
•
NUT STYLE: STAMPED
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS1.292 INCHES MINIMUM AND 1.299 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE OVERALL
MATERIALSTEEL OVERALL
NUT HEIGHT0.231 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
GRIPPING NOTCH QUANTITY6
NUT STYLESTAMPED
MATING MEMBER DIAMETER ACCOMMODATED0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
0N118168Interchangeable
interchangeable cross-reference
interchangeable
A472Interchangeable
interchangeable cross-reference
interchangeable
RF3410Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RF341000X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RF341000X?
RF341000X is a NUT,STAMPED.
What parts can replace RF341000X?
There are 3 known substitutes for RF341000X: 0N118168, A472, RF3410. Substitute compatibility should be verified for your specific system.
What is the NSN for RF341000X?
RF341000X is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-077-1930. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RF341000X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026