PartsTable
Technical Data Sheet
Download PDF

RF03073-2 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

RF03073-2: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: HEXAGON, nut_height: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-176-6811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RF03073-2
NSN: 5310-00-176-6811
FSC: 5310 — Nuts and Washers
CAGE: 94375 — LAX ELECTRONICS, INC. DBA AUTOMATIC CONNECTOR DIV AUTOMATIC CONNECTOR (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleHEXAGON
nut_height0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNS
thread_directionRIGHT-HAND
width_across_flats0.312 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch36
material_document_and_classificationQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-176-6811
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: RF03073-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
THREAD SERIESUNS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH36
MATERIALSTEEL COMP 303 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
580R763H03Reference document
Same NSN cross-reference
Reference document — Secondary reference
17219-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
5199-14-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RF03073-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RF03073-2?
RF03073-2 is a NUT,PLAIN,HEXAGON.
What parts can replace RF03073-2?
There are 3 known substitutes for RF03073-2: 580R763H03, 17219-16, 5199-14-1. Substitute compatibility should be verified for your specific system.
What is the NSN for RF03073-2?
RF03073-2 is cataloged in the U.S. Government catalog under NSN 5310-00-176-6811. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RF03073-2