PartsTable
Technical Data Sheet
PartsTable / COMPONENT / REP5M7FS464
REP5M7FS464 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 SHAFT, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, overall_length: 3.0480 INCHES MINIMUM AND 3.0780 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-079-9960, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REP5M7FS464
NSN: 3110-00-079-9960
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 SHAFT
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length3.0480 INCHES MINIMUM AND 3.0780 INCHES MAXIMUM IN
shank_diameter0.4375 INCHES NOMINAL IN
inner_ring_width0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN
outer_ring_width0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM IN
special_features0.0004 IN. MAX RADIAL CLEARANCE IN
style_designatorDOUBLE ROW, STAGGERED, BALL
NSN3110-00-079-9960
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REP5M7FS464 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
SEAL QUANTITY: 2
•
THREAD QUANTITY PER INCH: 20
•
INNER RING WIDTH: 0.8700 INCHES NOMINAL IN
•
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
•
OUTER RING WIDTH: 0.6500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
SEAL QUANTITY2
THREAD QUANTITY PER INCH20
SPECIAL FEATURES0.0004 IN. MAX RADIAL CLEARANCE IN
INNER RING WIDTH0.8700 INCHES NOMINAL IN
SELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
OUTER RING WIDTH0.6500 INCHES NOMINAL IN
LENGTH FROM BORE CENTER TO SHANK END2.4380 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS21151-11GInterchangeable
interchangeable cross-reference
interchangeable
AS21151Interchangeable
interchangeable cross-reference
interchangeable
MS21151-11Interchangeable
interchangeable cross-reference
interchangeable
BACB10AD7Interchangeable
interchangeable cross-reference
interchangeable
REP5M7FS210MILG3278AInterchangeable
interchangeable cross-reference
interchangeable
BACB10A438Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy REP5M7FS464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REP5M7FS464?
REP5M7FS464 is a BEARING,BALL,ROD END.
What parts can replace REP5M7FS464?
There are 14 known substitutes for REP5M7FS464: MS21151-11G, AS21151, MS21151-11 and 11 more. Substitute compatibility should be verified for your specific system.
Is REP5M7FS464 still available?
REP5M7FS464 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REP5M7FS464

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026