PartsTable
Technical Data Sheet
Download PDF

REP5H8A1172 MODIFIED — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

REP5H8A1172 MODIFIED: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, shank_style: HOLLOW, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 2.8430 INCHES NOMINAL IN, shank_diameter: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-126-5316, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REP5H8A1172 MODIFIED
NSN: 3110-01-126-5316
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL INNER RING
shank_styleHOLLOW
bore_diameter0.3125 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length2.8430 INCHES NOMINAL IN
shank_diameter0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
inner_ring_width0.8700 INCHES NOMINAL IN
outer_ring_width0.6560 INCHES NOMINAL IN
shank_bore_depth1.3425 INCHES NOMINAL IN
special_featuresSHANK VOID FILLED W/HYSOL R8-2038 PUTTY
style_designatorDOUBLE ROW, STAGGERED, BALL
NSN3110-01-126-5316
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REP5H8A1172 MODIFIED · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.6560 INCHES NOMINAL IN
•
SHANK BORE DEPTH: 1.3425 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE ROW, STAGGERED, BALL
•
SHANK BORE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.6560 INCHES NOMINAL IN
SHANK BORE DEPTH1.3425 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ROW, STAGGERED, BALL
OVERALL LENGTH2.8430 INCHES NOMINAL IN
SHANK BORE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.2500 INCHES NOMINAL IN
SELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 2
REP5H8A1172Reference document
Same NSN cross-reference
Reference document — Secondary reference
65413-02201-101Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy REP5H8A1172 MODIFIED?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REP5H8A1172 MODIFIED?
REP5H8A1172 MODIFIED is a BEARING,BALL,ROD END.
What parts can replace REP5H8A1172 MODIFIED?
There are 2 known substitutes for REP5H8A1172 MODIFIED: REP5H8A1172, 65413-02201-101. Substitute compatibility should be verified for your specific system.
What is the NSN for REP5H8A1172 MODIFIED?
REP5H8A1172 MODIFIED is cataloged in the U.S. Government catalog under NSN 3110-01-126-5316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REP5H8A1172 MODIFIED