PartsTable
Technical Data Sheet
Download PDF

REP4H6-5FS464 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

REP4H6-5FS464: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL BALL, shank_style: HOLLOW, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 2.3440 INCHES NOMINAL IN, shank_diameter: 0.6230 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-006-4015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REP4H6-5FS464
NSN: 3110-01-006-4015
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL BALL
shank_styleHOLLOW
bore_diameter0.2500 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length2.3440 INCHES NOMINAL IN
shank_diameter0.6230 INCHES NOMINAL IN
inner_ring_width0.5930 INCHES NOMINAL IN
outer_ring_width0.4380 INCHES NOMINAL IN
shank_bore_depth1.2190 INCHES NOMINAL IN
style_designatorDOUBLE ROW, STAGGERED, BALL
bearing_seal_typeCONTACT
NSN3110-01-006-4015
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REP4H6-5FS464 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.6230 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4380 INCHES NOMINAL IN
•
SHANK BORE DEPTH: 1.2190 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE ROW, STAGGERED, BALL
•
SHANK BORE DIAMETER: 0.3860 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.6230 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4380 INCHES NOMINAL IN
SHANK BORE DEPTH1.2190 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ROW, STAGGERED, BALL
OVERALL LENGTH2.3440 INCHES NOMINAL IN
SHANK BORE DIAMETER0.3860 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.9380 INCHES NOMINAL IN
SELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
GB525BN5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy REP4H6-5FS464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REP4H6-5FS464?
REP4H6-5FS464 is a BEARING,BALL,ROD END.
What parts can replace REP4H6-5FS464?
There is 1 known substitute for REP4H6-5FS464: GB525BN5. Substitute compatibility should be verified for your specific system.
What is the NSN for REP4H6-5FS464?
REP4H6-5FS464 is cataloged in the U.S. Government catalog under NSN 3110-01-006-4015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REP4H6-5FS464

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.