PartsTable
Technical Data Sheet
PartsTable / COMPONENT / REP4H5-4F
REP4H5-4F ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 ROD END BODY, shank_style: HOLLOW, bore_diameter: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, shank_diameter: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, inner_ring_width: 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-625-9284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REP4H5-4F
NSN: 3110-00-625-9284
FSC: 3110
CAGE: 73134 — ROLLER BEARING COMPANY OF AMERICA, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 ROD END BODY
shank_styleHOLLOW
bore_diameter0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
shank_diameter0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
inner_ring_width0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN
outer_ring_width0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
shank_bore_depth1.0940 INCHES MINIMUM AND 1.1560 INCHES MAXIMUM IN
special_featuresFILLED WITH 80 PCT SPECIFIED LUBRICANT
style_designatorDOUBLE ROW, STAGGERED, BALL
bearing_seal_typeCONTACT
NSN3110-00-625-9284
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REP4H5-4F · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP E52100 INNER RING
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
BORE DIAMETER: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP E52100 INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL
SURFACE TREATMENTCADMIUM OVERALL
BORE DIAMETER0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
MATERIALSTEEL COMP 4130 OUTER RING
MATERIALSTEEL COMP E52100 BALL
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
MS21153-4GInterchangeable
interchangeable cross-reference
interchangeable
L2088598-2Interchangeable
interchangeable cross-reference
interchangeable
AN951RE3FL4MILG3278Interchangeable
interchangeable cross-reference
interchangeable
AS21152Interchangeable
interchangeable cross-reference
interchangeable
REP3MR3FS381Interchangeable
interchangeable cross-reference
interchangeable
43P4H6FS464Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy REP4H5-4F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REP4H5-4F?
REP4H5-4F is a BEARING,BALL,ROD END.
What parts can replace REP4H5-4F?
There are 15 known substitutes for REP4H5-4F: MS21153-4G, L2088598-2, AN951RE3FL4MILG3278 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for REP4H5-4F?
REP4H5-4F is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-625-9284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REP4H5-4F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026