PartsTable
Technical Data Sheet
PartsTable / COMPONENT / REP4H-2FS464
REP4H-2FS464 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 RETAINER, shank_style: HOLLOW, bore_diameter: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, overall_length: 2.3440 INCHES NOMINAL IN, shank_diameter: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-126-1681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REP4H-2FS464
NSN: 3110-01-126-1681
FSC: 3110
CAGE: 73134 — ROLLER BEARING COMPANY OF AMERICA, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 RETAINER
shank_styleHOLLOW
bore_diameter0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length2.3440 INCHES NOMINAL IN
shank_diameter0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
inner_ring_width0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN
outer_ring_width0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
shank_bore_depth1.0940 INCHES MINIMUM AND 1.1560 INCHES MAXIMUM IN
special_features80 PCT FULL OF SPECIFIED LUBRICANT
style_designatorDOUBLE ROW, STAGGERED, BALL
NSN3110-01-126-1681
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REP4H-2FS464 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
LUBRICATION MATERIAL: GREASE
•
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
•
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM IN
BORE DIAMETER0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
SELF-ALIGNMENT LOCATIONINTERNAL
LUBRICATION MATERIALGREASE
SPECIAL FEATURES80 PCT FULL OF SPECIFIED LUBRICANT
SELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
OUTER RING WIDTH0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
ALIGNMENT TYPESELF-ALIGNING
INNER RING WIDTH0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM IN
LENGTH FROM BORE CENTER TO SHANK END1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
REP4H8-2FS210Interchangeable
interchangeable cross-reference
interchangeable
ABR4H-5GInterchangeable
interchangeable cross-reference
interchangeable
MS21152-5GInterchangeable
interchangeable cross-reference
interchangeable
REP4H8-5FInterchangeable
Same NIIN cross-reference
interchangeable
MS21152-5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy REP4H-2FS464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REP4H-2FS464?
REP4H-2FS464 is a BEARING,BALL,ROD END.
What parts can replace REP4H-2FS464?
There are 5 known substitutes for REP4H-2FS464: REP4H8-2FS210, ABR4H-5G, MS21152-5G and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for REP4H-2FS464?
REP4H-2FS464 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-126-1681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REP4H-2FS464

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026