REP3MK4-6F — BEARING,BALL,ROD END

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

REP3MK4-6F: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, overall_length: 2.2020 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-116-9309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

REP3MK4-6F

NSN: 3110-01-116-9309
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 73134 — ROLLER BEARING COMPANY OF AMERICA, INC. (USA)

SPECIFICATIONS

material	STEEL COMP E52100 BALL
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
seal_quantity	2
alignment_type	SELF-ALIGNING
overall_length	2.2020 INCHES NOMINAL IN
shank_diameter	0.2500 INCHES NOMINAL IN
inner_ring_width	0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
outer_ring_width	0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
special_features	80 PCT FULL OF SPECIFIED LUBRICANT; NAS 513 KEYWAY IN SHANK
style_designator	DOUBLE ROW, STAGGERED, BALL
NSN	3110-01-116-9309

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2500 INCHES NOMINAL IN

•

SHANK THREAD LENGTH: 0.0907 INCHES MINIMUM AND 0.0962 INCHES MAXIMUM IN

•

BEARING SEAL TYPE: CONTACT

•

LUBRICATION MATERIAL: GREASE

•

OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES

•

STYLE DESIGNATOR: DOUBLE ROW, STAGGERED, BALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2500 INCHES NOMINAL IN
SHANK THREAD LENGTH	0.0907 INCHES MINIMUM AND 0.0962 INCHES MAXIMUM IN
BEARING SEAL TYPE	CONTACT
LUBRICATION MATERIAL	GREASE
OUTER RING WIDTH	0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
STYLE DESIGNATOR	DOUBLE ROW, STAGGERED, BALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE RETAINER

SUBSTITUTES & CROSS-REFERENCES 3

MS21151-6CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS21151Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

RAP3MS4-2FS464Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy REP3MK4-6F?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is REP3MK4-6F?

REP3MK4-6F is a BEARING,BALL,ROD END.

What parts can replace REP3MK4-6F?

There are 3 known substitutes for REP3MK4-6F: MS21151-6C, AS21151, RAP3MS4-2FS464. Substitute compatibility should be verified for your specific system.

What is the NSN for REP3MK4-6F?

REP3MK4-6F is cataloged in the U.S. Government catalog under NSN 3110-01-116-9309. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

REP3MK4-6F — BEARING,BALL,ROD END

Request a Quote — REP3MK4-6F