PartsTable
Technical Data Sheet
PartsTable / COMPONENT / REP3H5-1
REP3H5-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL SHAFT, shank_style: HOLLOW, bore_diameter: 0.1900 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 1.7660 INCHES NOMINAL IN, shank_diameter: 0.4300 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-893-6785, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REP3H5-1
NSN: 3110-00-893-6785
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL SHAFT
shank_styleHOLLOW
bore_diameter0.1900 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length1.7660 INCHES NOMINAL IN
shank_diameter0.4300 INCHES NOMINAL IN
inner_ring_width0.4370 INCHES NOMINAL IN
outer_ring_width0.3280 INCHES NOMINAL IN
shank_bore_depth0.8750 INCHES NOMINAL IN
style_designatorDOUBLE ROW, STAGGERED, BALL
bearing_seal_typeCONTACT
NSN3110-00-893-6785
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REP3H5-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.3280 INCHES NOMINAL IN
•
LENGTH FROM BORE CENTER TO SHANK END: 1.3750 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
INNER RING WIDTH: 0.4370 INCHES NOMINAL IN
•
SHANK BORE DEPTH: 0.8750 INCHES NOMINAL IN
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.3280 INCHES NOMINAL IN
LENGTH FROM BORE CENTER TO SHANK END1.3750 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
INNER RING WIDTH0.4370 INCHES NOMINAL IN
SHANK BORE DEPTH0.8750 INCHES NOMINAL IN
SELF-ALIGNMENT LOCATIONINTERNAL
LUBRICATION MATERIALGREASE
ALIGNMENT TYPESELF-ALIGNING
SEAL QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
AS21152Interchangeable
interchangeable cross-reference
interchangeable
REP3MR3FS381Interchangeable
interchangeable cross-reference
interchangeable
43P4H6FS464Interchangeable
interchangeable cross-reference
interchangeable
RE448FS10160SInterchangeable
interchangeable cross-reference
interchangeable
REP4H8-3GInterchangeable
interchangeable cross-reference
interchangeable
REP4H8FS160Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy REP3H5-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REP3H5-1?
REP3H5-1 is a BEARING,BALL,ROD END.
What parts can replace REP3H5-1?
There are 20 known substitutes for REP3H5-1: AS21152, REP3MR3FS381, 43P4H6FS464 and 17 more. Substitute compatibility should be verified for your specific system.
Is REP3H5-1 still available?
REP3H5-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REP3H5-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026