PartsTable
Technical Data Sheet
Download PDF

REMS12ATC14-4 — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

REMS12ATC14-4: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, shank_style: EXTERNALLY THREADED, thread_class: 3A A, thread_diameter: 0.438 INCHES NOMINAL IN, style_designator: SHOULDERED BALL TYPE, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-201-9482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REMS12ATC14-4
NSN: 3120-01-201-9482
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
shank_styleEXTERNALLY THREADED
thread_class3A A
thread_diameter0.438 INCHES NOMINAL IN
style_designatorSHOULDERED BALL TYPE
thread_directionRIGHT-HAND
inner_member_width0.5310 INCHES NOMINAL IN
shank_thread_length1.0560 INCHES MINIMUM AND 1.1160 INCHES MAXIMUM IN
end_item_identificationAIRCRAFT H-46
thread_quantity_per_inch20
thread_series_designatorUNF
shank_end_to_shoulder_length1.1150 INCHES NOMINAL IN
NSN3120-01-201-9482
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: REMS12ATC14-4 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 1.0560 INCHES MINIMUM AND 1.1160 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 1.8060 INCHES NOMINAL IN
•
INNER MEMBER WIDTH: 0.5310 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED BALL TYPE
•
SHANK END TO SHOULDER LENGTH: 1.1150 INCHES NOMINAL IN
•
THREAD DIAMETER: 0.438 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
SHANK STYLE: EXTERNALLY THREADED
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.0560 INCHES MINIMUM AND 1.1160 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE1.8060 INCHES NOMINAL IN
INNER MEMBER WIDTH0.5310 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED BALL TYPE
SHANK END TO SHOULDER LENGTH1.1150 INCHES NOMINAL IN
THREAD DIAMETER0.438 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEEXTERNALLY THREADED
THREAD CLASS3A A
END ITEM IDENTIFICATIONAIRCRAFT H-46
SUBSTITUTES & CROSS-REFERENCES 2
REMS12ATC14-4YE9056Reference document
Same NSN cross-reference
Reference document — Secondary reference
A02RS281-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy REMS12ATC14-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REMS12ATC14-4?
REMS12ATC14-4 is a BEARING,PLAIN,ROD END.
What parts can replace REMS12ATC14-4?
There are 2 known substitutes for REMS12ATC14-4: REMS12ATC14-4YE9056, A02RS281-1. Substitute compatibility should be verified for your specific system.
What is the NSN for REMS12ATC14-4?
REMS12ATC14-4 is cataloged in the U.S. Government catalog under NSN 3120-01-201-9482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REMS12ATC14-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.