REM4TH16-2 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

REM4TH16-2: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: PLASTIC TETRAFLUOROETHYLENE RACE LINER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_length: 1.7990 INCHES MINIMUM AND 1.8390 INCHES MAXIMUM IN, hardness_rating: 26.0 ROCKWELL C NOMINAL ROD END BODY. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-252-2355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

REM4TH16-2

NSN: 3120-00-252-2355
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 99528 — RADIAL BEARING CORPORATION DBA RADIAL BEARING CORP OF CONNECTICU DIV RADIAL BEARING LLC (USA)

SPECIFICATIONS

material	PLASTIC TETRAFLUOROETHYLENE RACE LINER
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_length	1.7990 INCHES MINIMUM AND 1.8390 INCHES MAXIMUM IN
hardness_rating	26.0 ROCKWELL C NOMINAL ROD END BODY
thread_diameter	0.250 INCHES NOMINAL IN
special_features	EXCLUDE PLATING ON SHANK
style_designator	SHOULDERED BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM ROD END BODY
inner_member_width	0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
NSN	3120-00-252-2355

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 0.4930 INCHES MINIMUM AND 0.5280 INCHES MAXIMUM IN

•

BORE CENTER TO SHANK END DISTANCE: 1.3980 INCHES MINIMUM AND 1.4280 INCHES MAXIMUM IN

•

INNER MEMBER WIDTH: 0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN

•

HARDNESS RATING: 57.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM INNER MEMBER

•

OUTER MEMBER WIDTH: 0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: SHOULDERED BALL TYPE

•

SHANK END TO SHOULDER LENGTH: 0.4550 INCHES MINIMUM AND 0.4850 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	0.4930 INCHES MINIMUM AND 0.5280 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE	1.3980 INCHES MINIMUM AND 1.4280 INCHES MAXIMUM IN
INNER MEMBER WIDTH	0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
HARDNESS RATING	57.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING	26.0 ROCKWELL C NOMINAL ROD END BODY
OUTER MEMBER WIDTH	0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
STYLE DESIGNATOR	SHOULDERED BALL TYPE
SHANK END TO SHOULDER LENGTH	0.4550 INCHES MINIMUM AND 0.4850 INCHES MAXIMUM IN
THREAD DIAMETER	0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER

SUBSTITUTES & CROSS-REFERENCES 2

177293Reference document

Same NSN cross-reference

Reference document — Secondary reference

206-001-057-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy REM4TH16-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is REM4TH16-2?

REM4TH16-2 is a BEARING,PLAIN,ROD END.

What parts can replace REM4TH16-2?

There are 2 known substitutes for REM4TH16-2: 177293, 206-001-057-3. Substitute compatibility should be verified for your specific system.

What is the NSN for REM4TH16-2?

REM4TH16-2 is cataloged in the U.S. Government catalog under NSN 3120-00-252-2355. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

REM4TH16-2 — BEARING,PLAIN,ROD END

Request a Quote — REM4TH16-2