PartsTable
Technical Data Sheet
PartsTable / COMPONENT / REC207S
REC207S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_diameter: 0.094 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, style_designator: DONUT TOP COUNTERBORED, first_counterbore_depth: 0.156 INCHES NOMINAL IN, first_counterbore_diameter: 0.219 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-209-9352, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REC207S
NSN: 5340-00-209-9352
FSC: 5340
CAGE: 24324 — RUSSELL INDUSTRIES INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_diameter0.094 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
style_designatorDONUT TOP COUNTERBORED
first_counterbore_depth0.156 INCHES NOMINAL IN
first_counterbore_diameter0.219 INCHES NOMINAL IN
outside/top_flange_diameter0.531 INCHES NOMINAL IN
NSN5340-00-209-9352
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: REC207S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE/TOP FLANGE DIAMETER: 0.531 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DONUT TOP COUNTERBORED
•
HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
FIRST COUNTERBORE DEPTH: 0.156 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
OVERALL HEIGHT0.250 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.531 INCHES NOMINAL IN
STYLE DESIGNATORDONUT TOP COUNTERBORED
HOLE DIAMETER0.094 INCHES NOMINAL IN
FIRST COUNTERBORE DEPTH0.156 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.219 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
L23-108622-336X4Upgraded Successor
successor cross-reference
successor
10083Upgraded Successor
successor cross-reference
successor
RA1881Upgraded Successor
successor cross-reference
successor
7054Interchangeable
interchangeable cross-reference
interchangeable
53183Interchangeable
interchangeable cross-reference
interchangeable
2410 1-19/64Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy REC207S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REC207S?
REC207S is a BUMPER.
What parts can replace REC207S?
There are 24 known substitutes for REC207S: L23-108622-336X4, 10083, RA1881 and 21 more. Substitute compatibility should be verified for your specific system.
Is REC207S still available?
REC207S is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REC207S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026