PartsTable
Technical Data Sheet
Download PDF

REB3N3 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

REB3N3: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL ROD END BODY, shank_style: INTERNALLY THREADED W/BEAD, thread_class: 3B, bore_diameter: 0.1900 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 1.7660 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-277-0171, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
REB3N3
NSN: 3110-00-277-0171
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL ROD END BODY
shank_styleINTERNALLY THREADED W/BEAD
thread_class3B
bore_diameter0.1900 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
overall_length1.7660 INCHES NOMINAL IN
shank_diameter0.3750 INCHES NOMINAL IN
shield_quantity2
inner_ring_width0.4370 INCHES NOMINAL IN
outer_ring_width0.3280 INCHES NOMINAL IN
special_featuresSHANK END SLOTTED 0.0620 IN. W BY 0.0560 IN. DP,NO. 50 /0.0701 IN./ HOLE IN SHANK 0.3125 IN. FROM END AND AT RIGHT ANGLE TO SLOT IN
style_designatorDOUBLE ROW, STAGGERED, BALL
NSN3110-00-277-0171
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: REB3N3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.3750 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 0.8125 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.4380 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3280 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: DOUBLE ROW, STAGGERED, BALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.3750 INCHES NOMINAL IN
SHANK THREAD LENGTH0.8125 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.4380 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3280 INCHES NOMINAL IN
SHIELD QUANTITY2
STYLE DESIGNATORDOUBLE ROW, STAGGERED, BALL
OVERALL LENGTH1.7660 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.7810 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 3
REPB3N3FS428Reference document
Same NSN cross-reference
Reference document — Secondary reference
REB3N3FS160Reference document
Same NSN cross-reference
Reference document — Secondary reference
REB3N3FS10160S3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy REB3N3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is REB3N3?
REB3N3 is a BEARING,BALL,ROD END.
What parts can replace REB3N3?
There are 3 known substitutes for REB3N3: REPB3N3FS428, REB3N3FS160, REB3N3FS10160S3. Substitute compatibility should be verified for your specific system.
What is the NSN for REB3N3?
REB3N3 is cataloged in the U.S. Government catalog under NSN 3110-00-277-0171. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — REB3N3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.