PartsTable
Technical Data Sheet
PartsTable / MRO / RE65GR100
RE65GR100 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, body_height: 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, body_length: 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, cubic_measure: 0.133 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-990-4130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RE65GR100
NSN: 5905-00-990-4130
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_width0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
body_height0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
body_length0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
cubic_measure0.133 CUBIC INCHES
terminal_typeTAB, SOLDER LUG
inclosure_typeENCASED
terminal_width0.140 INCHES MINIMUM IN
terminal_length0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
style_designatorAXIAL TERMINAL (S)
mounting_hole_size0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
electrical_resistance0.100 OHMS
reliability_indicatorNOT ESTABLISHED
NSN5905-00-990-4130
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND,INDUCT TITLE COMPONENT PN RE65GR100 MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
TEST DATA DOCUMENT: 81349-MIL-R-18546 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-18546/1 GOVERNMENT SPECIFICATION
•
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 275.0
•
TERMINAL WIDTH: 0.140 INCHES MINIMUM IN
•
BODY WIDTH: 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
BODY HEIGHT: 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
RELIABILITY INDICATOR: NOT ESTABLISHED
•
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER: 275.0
TECHNICAL CHARACTERISTICS (FLIS)
TEST DATA DOCUMENT81349-MIL-R-18546 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-R-18546/1 GOVERNMENT SPECIFICATION
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 275.0
TERMINAL WIDTH0.140 INCHES MINIMUM IN
BODY WIDTH0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
BODY HEIGHT0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
RELIABILITY INDICATORNOT ESTABLISHED
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275.0
MOUNTING HOLE SIZE0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
TERMINAL LENGTH0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
RE65GR100Interchangeable
interchangeable cross-reference
interchangeable
859002-0008Interchangeable
Same NIIN cross-reference
interchangeable
905139-5Interchangeable
Same NIIN cross-reference
interchangeable
MIL-R-18546/1Interchangeable
Same NIIN cross-reference
interchangeable
352250011913Interchangeable
Same NIIN cross-reference
interchangeable
RH10-0410HM1PCT12-5WInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RE65GR100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RE65GR100?
RE65GR100 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace RE65GR100?
There are 8 known substitutes for RE65GR100: RE65GR100, 859002-0008, 905139-5 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RE65GR100?
RE65GR100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-990-4130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RE65GR100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026