RE127-2001-0010 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

RE127-2001-0010: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.051 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-576-6031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

RE127-2001-0010

NSN: 5340-00-576-6031
FSC: 5340 — Hardware, Commercial
CAGE: 02602 — AEROJET ROCKETDYNE OF DE, INC (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.051 INCHES NOMINAL IN
loop_inside_diameter	0.750 INCHES NOMINAL IN
cushioning_environmental_protection	HEAT
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.845 INCHES NOMINAL IN
NSN	5340-00-576-6031

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: HEAT

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	HEAT
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.845 INCHES NOMINAL IN
MATERIAL	STEEL COMP 321 BAND

SUBSTITUTES & CROSS-REFERENCES 5

310633Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

327B641P012Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

5340PL0776834Reference document

Same NSN cross-reference

Reference document — Informative reference only

535D7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

389-12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy RE127-2001-0010?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RE127-2001-0010?

RE127-2001-0010 is a CLAMP,LOOP.

What parts can replace RE127-2001-0010?

There are 5 known substitutes for RE127-2001-0010: 310633, 327B641P012, 5340PL0776834 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RE127-2001-0010?

RE127-2001-0010 is cataloged in the U.S. Government catalog under NSN 5340-00-576-6031. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RE127-2001-0010 — CLAMP,LOOP

Request a Quote — RE127-2001-0010