PartsTable
Technical Data Sheet
Download PDF

RE0021414 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

RE0021414: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 30.0 DEGREES NOMINAL, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT ONE SIDE, peripheral_diameter: 0.422 INCHES NOMINAL IN, center_hole_diameter: 0.312 INCHES NOMINAL IN, distance_between_ends: 0.032 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-049-5705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RE0021414
NSN: 5330-01-049-5705
FSC: 5330 — Packing and Gasket Materials
CAGE: 9331B — ALFARIVER DEFENSE S.L (ESP)
SPECIFICATIONS
angle30.0 DEGREES NOMINAL
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT ONE SIDE
peripheral_diameter0.422 INCHES NOMINAL IN
center_hole_diameter0.312 INCHES NOMINAL IN
distance_between_ends0.032 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
cross-sectional_height0.081 INCHES NOMINAL IN
cross-sectional_thickness0.027 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
NSN5330-01-049-5705
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RE0021414 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.081 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 30.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 0.422 INCHES NOMINAL IN
•
DISTANCE BETWEEN ENDS: 0.032 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.027 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.081 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE30.0 DEGREES NOMINAL
PERIPHERAL DIAMETER0.422 INCHES NOMINAL IN
DISTANCE BETWEEN ENDS0.032 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.312 INCHES NOMINAL IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT ONE SIDE
SUBSTITUTES & CROSS-REFERENCES 3
SR6144-0006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S11109-011Reference document
Same NSN cross-reference
Reference document — Secondary reference
10051305Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy RE0021414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RE0021414?
RE0021414 is a RETAINER,PACKING.
What parts can replace RE0021414?
There are 3 known substitutes for RE0021414: SR6144-0006, S11109-011, 10051305. Substitute compatibility should be verified for your specific system.
What is the NSN for RE0021414?
RE0021414 is cataloged in the U.S. Government catalog under NSN 5330-01-049-5705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RE0021414

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.