PartsTable
Technical Data Sheet
Download PDF

RE-B102245-1 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

RE-B102245-1: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3A FIRST END A, connection_type: THREADED EXTERNAL BOSS FIRST END, inside_diameter: 0.750 INCHES NOMINAL IN, connection_style: EXTERNAL SEAT FOR GASKET SEAL (BOSS) FIRST END, outside_diameter: 1.230 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-142-7892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RE-B102245-1
NSN: 4720-01-142-7892
FSC: 4720 — Hose and Flexible Tubing
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3A FIRST END A
connection_typeTHREADED EXTERNAL BOSS FIRST END
inside_diameter0.750 INCHES NOMINAL IN
connection_styleEXTERNAL SEAT FOR GASKET SEAL (BOSS) FIRST END
outside_diameter1.230 INCHES NOMINAL IN
special_featuresINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.750 INCHES FIRST END IN
NSN4720-01-142-7892
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: RE-B102245-1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 63.250 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
CONNECTION STYLE: EXTERNAL SEAT FOR GASKET SEAL (BOSS) FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
CONNECTION TYPE: THREADED EXTERNAL BOSS FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH63.250 INCHES NOMINAL OVERALL IN
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS9.500 INCHES IN
CONNECTION STYLEEXTERNAL SEAT FOR GASKET SEAL (BOSS) FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CONNECTION TYPETHREADED EXTERNAL BOSS FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER1.230 INCHES NOMINAL IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
SUBSTITUTES & CROSS-REFERENCES 1
RE-B102245Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RE-B102245-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RE-B102245-1?
RE-B102245-1 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace RE-B102245-1?
There is 1 known substitute for RE-B102245-1: RE-B102245. Substitute compatibility should be verified for your specific system.
What is the NSN for RE-B102245-1?
RE-B102245-1 is cataloged in the U.S. Government catalog under NSN 4720-01-142-7892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RE-B102245-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.