PartsTable
Technical Data Sheet
PartsTable / COMPONENT / RC14
RC14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REGULATOR,ENGINE GENERATOR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY HANDLE, design_type: FRICTION, mounting_method: SIDE SETSCREW, inside_diameter_length: 0.840 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-413-6261, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RC14
NSN: 5340-00-413-6261
FSC: 5340
CAGE: 95760 — PROTECTIVE CLOSURES CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY HANDLE
design_typeFRICTION
mounting_methodSIDE SETSCREW
inside_diameter_length0.840 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.875 INCHES NOMINAL IN
NSN5340-00-413-6261
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RC14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.840 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.875 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
DESIGN TYPE: FRICTION
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH0.840 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.875 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
DESIGN TYPEFRICTION
MATERIALPLASTIC, POLYETHYLENE (PP)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
D-638Interchangeable
interchangeable cross-reference
interchangeable
16233Interchangeable
interchangeable cross-reference
interchangeable
560C-14-2Interchangeable
interchangeable cross-reference
interchangeable
37460WInterchangeable
interchangeable cross-reference
interchangeable
081844Interchangeable
interchangeable cross-reference
interchangeable
RC-14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RC14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RC14?
RC14 is a REGULATOR,ENGINE GENERATOR.
What parts can replace RC14?
There are 7 known substitutes for RC14: D-638, 16233, 560C-14-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RC14?
RC14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-413-6261. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RC14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026