PartsTable
Technical Data Sheet

RALTR1 L/C — BEARING UNIT,BALL

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

RALTR1 L/C: BEARING UNIT,BALL.

The BEARING UNIT,BALL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, block_type: FIXED, bore_diameter: 1.0000 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, housing_height: 3.0000 INCHES NOMINAL IN, housing_length: 0.7640 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3130-01-098-3282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RALTR1 L/C
NSN: 3130-01-098-3282
FSC: 3130 — Bearings, Mounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
block_typeFIXED
bore_diameter1.0000 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
housing_height3.0000 INCHES NOMINAL IN
housing_length0.7640 INCHES NOMINAL IN
shaft_end_typeOPEN
flange_thickness0.1420 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
style_designatorFLANGE BLOCK
features_providedGROUND ROLLING ELEMENT GROOVE
mounting_hole_typeSQUARE
mounting_hole_width0.3390 INCHES MINIMUM AND 0.3490 INCHES MAXIMUM IN
NSN3130-01-098-3282
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: RALTR1 L/C · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ASSEMBLY OVERALL LENGTH: 0.7640 INCHES NOMINAL IN
•
HOUSING HEIGHT: 3.0000 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FLANGE THICKNESS: 0.1420 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
•
MOUNTING HOLE TYPE: SQUARE
•
ROTATING ELEMENT LOCKING METHOD: STRAIGHT SLEEVE
•
BLOCK TYPE: FIXED
•
STYLE DESIGNATOR: FLANGE BLOCK
TECHNICAL CHARACTERISTICS
ASSEMBLY OVERALL LENGTH0.7640 INCHES NOMINAL IN
HOUSING HEIGHT3.0000 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
FLANGE THICKNESS0.1420 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
MOUNTING HOLE TYPESQUARE
ROTATING ELEMENT LOCKING METHODSTRAIGHT SLEEVE
BLOCK TYPEFIXED
STYLE DESIGNATORFLANGE BLOCK
OVERALL OUTSIDE DIAMETER3.5620 INCHES NOMINAL IN
FEATURES PROVIDEDGROUND ROLLING ELEMENT GROOVE
SUBSTITUTES & CROSS-REFERENCES 3
2G2876Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12247Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
RALTR 1 L/COLLARReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy RALTR1 L/C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RALTR1 L/C?
RALTR1 L/C is a BEARING UNIT,BALL.
What parts can replace RALTR1 L/C?
There are 3 known substitutes for RALTR1 L/C: 2G2876, 12247, RALTR 1 L/COLLAR. Substitute compatibility should be verified for your specific system.
What is the NSN for RALTR1 L/C?
RALTR1 L/C is cataloged in the U.S. Government catalog under NSN 3130-01-098-3282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RALTR1 L/C