PartsTable
Technical Data Sheet

RAK1 7/8 — BEARING UNIT,BALL

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

RAK1 7/8: BEARING UNIT,BALL.

The BEARING UNIT,BALL is a the manufacturer industrial component. Key specifications include material: RUBBER AND STEEL SEAL, seal_type: CONTACT, block_type: FIXED, base_length: 2.1250 INCHES NOMINAL IN, bore_diameter: 1.8750 INCHES NOMINAL IN, housing_width: 7.8750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3130-00-824-5181, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RAK1 7/8
NSN: 3130-00-824-5181
FSC: 3130 — Bearings, Mounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialRUBBER AND STEEL SEAL
seal_typeCONTACT
block_typeFIXED
base_length2.1250 INCHES NOMINAL IN
bore_diameter1.8750 INCHES NOMINAL IN
housing_width7.8750 INCHES NOMINAL IN
seal_locationBOTH ENDS
alignment_typeSELF-ALIGNING
base_thickness0.7500 INCHES NOMINAL IN
housing_height4.3125 INCHES NOMINAL IN
shaft_end_typeOPEN
collar_locationONE END
NSN3130-00-824-5181
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: RAK1 7/8 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
ASSEMBLY OVERALL LENGTH: 2.3438 INCHES NOMINAL IN
•
HOUSING HEIGHT: 4.3125 INCHES NOMINAL IN
•
MOUNTING SLOT LENGTH: 1.0625 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MOUNTING HOLE TYPE: SLOTTED
•
ROTATING ELEMENT LOCKING METHOD: ECCENTRIC CAM LOCKING COLLAR
TECHNICAL CHARACTERISTICS
SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
ASSEMBLY OVERALL LENGTH2.3438 INCHES NOMINAL IN
HOUSING HEIGHT4.3125 INCHES NOMINAL IN
MOUNTING SLOT LENGTH1.0625 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
MOUNTING HOLE TYPESLOTTED
ROTATING ELEMENT LOCKING METHODECCENTRIC CAM LOCKING COLLAR
SEAL LOCATIONBOTH ENDS
BLOCK TYPEFIXED
OTHER ITEMS IN FSC 3130 — Bearings, Mounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3130-00-001-5118 3130-00-001-5137 3130-00-001-6585 3130-00-003-0422 3130-00-003-0455 3130-00-003-0794 3130-00-003-2802 3130-00-003-9535
SUBSTITUTES & CROSS-REFERENCES 1
PB200-1 7-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RAK1 7/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RAK1 7/8?
RAK1 7/8 is a BEARING UNIT,BALL.
What parts can replace RAK1 7/8?
There is 1 known substitute for RAK1 7/8: PB200-1 7-8. Substitute compatibility should be verified for your specific system.
What is the NSN for RAK1 7/8?
RAK1 7/8 is cataloged in the U.S. Government catalog under NSN 3130-00-824-5181. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RAK1 7/8