PartsTable
Technical Data Sheet
Download PDF

RABR3-4 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

RABR3-4: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.8437 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-037-8249, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RABR3-4
NSN: 3110-01-037-8249
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.8437 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
load_directionRADIAL
surface_finishGROUND
outer_ring_width0.5906 INCHES NOMINAL IN
special_featuresINNER RING EXTENDS COLLAR SIDE ONLY,FURNISHED WITH ELECTRICALLY CONDUCTIVE RUBBER INTERLINER
style_designatorSINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
bearing_seal_typeCONTACT
NSN3110-01-037-8249
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RABR3-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
OUTER RING WIDTH: 0.5906 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
•
OVERALL OUTSIDE DIAMETER: 47.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
OUTER RING WIDTH0.5906 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
OVERALL WIDTH0.8437 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER47.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RABR3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RABR3-4?
RABR3-4 is a BEARING,BALL,ANNULAR.
What is the NSN for RABR3-4?
RABR3-4 is cataloged in the U.S. Government catalog under NSN 3110-01-037-8249. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RABR3-4