PartsTable
Technical Data Sheet
Download PDF

RA20854-3 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

RA20854-3: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 1.625 INCHES NOMINAL IN, material: COTTON AND RUBBER TOP RING, inside_diameter: 1.750 INCHES NOMINAL IN, outside_diameter: 2.500 INCHES NOMINAL IN, cross-sectional_shape_style: ANGLE BOTTOM RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-103-5610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RA20854-3
NSN: 5330-00-103-5610
FSC: 5330 — Packing and Gasket Materials
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
height1.625 INCHES NOMINAL IN
materialCOTTON AND RUBBER TOP RING
inside_diameter1.750 INCHES NOMINAL IN
outside_diameter2.500 INCHES NOMINAL IN
intermediate_ring_quantity6
cross-sectional_shape_styleANGLE BOTTOM RING
NSN5330-00-103-5610
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: RA20854-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE RING QUANTITY: 6
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE BOTTOM RING
•
INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
HEIGHT: 1.625 INCHES NOMINAL IN
•
MATERIAL: COTTON AND RUBBER BOTTOM RING
TECHNICAL CHARACTERISTICS
INTERMEDIATE RING QUANTITY6
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE BOTTOM RING
INSIDE DIAMETER1.750 INCHES NOMINAL IN
HEIGHT1.625 INCHES NOMINAL IN
MATERIALCOTTON AND RUBBER BOTTOM RING
MATERIALCOTTON AND RUBBER INTERMEDIATE RING
MATERIALCOTTON AND RUBBER TOP RING
SUBSTITUTES & CROSS-REFERENCES 1
RA20854-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy RA20854-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RA20854-3?
RA20854-3 is a PACKING ASSEMBLY.
What parts can replace RA20854-3?
There is 1 known substitute for RA20854-3: RA20854-7. Substitute compatibility should be verified for your specific system.
What is the NSN for RA20854-3?
RA20854-3 is cataloged in the U.S. Government catalog under NSN 5330-00-103-5610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RA20854-3